Your shoe getting cracked after several uses is a common phenomenon. Even shoes from top-quality brands can get cracked as well.
Most of the time it’s unavoidable. But, hey! No worries. As long as the shoe crack is at its minimum and doesn’t affect the rest of the parts of the shoe you can still fix it. Fortunately, there are some easy fixes that you can easily encounter on your own at home.
All you need is a few accessories to get it fixed. A good quality shoe glue or repair adhesive, sandpaper, duck tape, and knife or scrape to spread things out. By following the right fixing method you can easily transform your shoe into a brand new one.
These easy fixes will certainly save your cost and other repairing hassles to some extent. So, without further ado let’s discuss how to fix a cracked sole of a shoe.
Read More: Best Insoles for vans shoes
How to Fix a Cracked Sole of a Shoe
The broken shoe sole not only worsens the shoe’s quality it also becomes unusable for walking. Even if your shoe gets minor cracks, make sure you get it fixed before it becomes prominent over the days.
How to Repair Boot Soles?

Here We’ll cover how you can repair your boot soles in the most convenient way step by step:
Step One:
First, you need a tack or clamp or something similar to hold the sole onto the heel to keep it in place.
Step Two:
Secondly, use shoe glue or an adhesive and apply it evenly at the bottom of the boot. Use a thin layer of the adhesive to apply around the shoe’s edges. Before you drag the sole back to the boot let the adhesive sit upon it for 2-3 minutes.
Step Three:
Bring the sole back to the bottom of the shoe, press as hard as you can, and use the clamps to perfectly attach it to the shoe.
How to fix Broken Shoe sole?

The easy steps to fix broken shoe soles:
Step 1:
If the sole comes off from the bottom part of your shoe then gip the upper part and separate the entire sole. If your sole comes off from the upper part then reverse the process.
Step 2:
Clean both shoe and sole surfaces to remove all the dirt and gravel.
Step 3:
Now apply the same thick layer of shoe glue in the edges of both shoe and sole. Let it sit for a few seconds. For best results, it’s recommended to use the glue specifically made for shoes.
Step4:
Attach the sole to the shoe. Now, place one hand inside of the shoe and the other outside to slide the top part of it back and forth on the sole. This will get the air pockets out and let the glue attach the shoe and sole firmly.
Step 5:
To compress the upper into the lower part, put some blocks inside the shoe, wrap tape around it. Keep it like this for 24 hours and allow the glue to dry out.
HOW TO REPAIR CRACKED SOLE ( Video)
How to fix rubber sole shoes?

To fix rubber sole shoes you should come on the following steps:
Step1:
Separate the rubber sole from the bottom of the shoe.
Step2:
Make it dirt and debris free from the bottom of the shoe and make sure that it’s completely clean.
Step3:
Next, rub the surfaces of the rubber with an emery board.
Step 4:
Apply a shoe adhesive or glue as much as needed in the spit area of the shoe and sole. Use a wooden stick to spread out the glue evenly.
Step 5:
Attach the rubber sole to the shoe. Firmly compress it using a clamp and tapes if needed. Keep it like this for about 48 hours before using the shoe again.
Difference between Gum sole and Rubber sole
The rubber Sole is an elastic substance that is produced chemically or made from the juice of a tropical tree. Rubber soles are at once slip, oil, and water-resistant. You can use these in muddy and wet weather without even worrying about them getting damaged.
On the other hand, the gum soles are made of polybutadiene which comes out of processing oil. The Gum soles are considered better than the rubber soles for being a great alternative to Polyurethane soles. Polyurethane soles are the best shoe soles used for all types of footwear.
How to remove chewing gum from shoe sole?
You can easily take the chewing gum off the shoe by simply cooling it out. Because it’s hard to take it off as long as it has a normal temperature.
All you need is ice and a small scrape or a knife. Rub the ice cube onto the chewing gum for about 2 minutes until it cools down. Another way you can get the gum cold is by simply keeping it inside the refrigerator for a few minutes. Then when it cools down take off the chewing gum from the edge with the scrape.
How to fix a shoe sole without glue?
The Sole can accidentally get separated from the shoe at any time. Sometimes, you have no option but to use some shortcut fixes. There are ways you can fix the shoe sole without using glue. But they would not be as long-lasting. So, using shoe glue for a durable and effective result is always recommended. So, let’s find out how to fix shoe sole separation without glue:
One way you can fix your shoe’s sole separation is by simply sewing it. Use a copper-handed stitching needle and a good material threat for sewing. Now keep sewing on the separated areas from inside to outside or outside to inside until it completely attaches.
The other way you can fix it is by using double-sided duck tape. This tape has adhesive on both sides. Make sure the sole is clean enough. Now, cut the tape and evenly place them into the separated areas. Remember that it’s just a quick fix that will last for only one or two usages.
Conclusion:
Fixing cracked or broken shoe soles is not as complicated as you think. Besides, It saves you from unnecessary expenses and trouble. We hope this article on how to fix a cracked sole of a shoe provides enough information to help fix your shoe sole at your comfort.